核电站用1E级电缆
型号:
WDZ-HKYY-K3, WDZ-HKYYP2-K3
核电站用1E级K3类无卤低烟阻燃电缆,具有绝缘电阻高、阻燃性能好和使用寿命长,燃烧时基本不产生有毒气体和烟雾等优点。本产品主要技术指标采用法国RCC-E及NF系列标准和国际电工委员会IEC60502、IEC60332-3、IEC60754、IEC61034、IEEE383等标准,主要适用于核电站,也可用于地下变电站、高层建筑、地铁、船舶、码头、化工等安全要求高的场合。
关键词:
所属分类:
产品描述
核电站用1E级K3类控制电缆、电力电缆
1EK3 CABLE USED FOR NUCLEAR POWER STATION
产品特点
CHARACTERISTICS
核电站用1E级K3类无卤低烟阻燃电缆,具有绝缘电阻高、阻燃性能好和使用寿命长,燃烧时基本不产生有毒气体和烟雾等优点。本产品主要技术指标采用法国RCC-E及NF系列标准和国际电工委员会IEC60502、IEC60332-3、IEC60754、IEC61034、IEEE383等标准,主要适用于核电站,也可用于地下变电站、高层建筑、地铁、船舶、码头、化工等安全要求高的场合。
This product has the following a dventages:a high insulation resistance, a good flame retarding property , a long service life and not producing poisonous gas or smoke while being burned ,etc Its major technological qualifications conform to French RCC-E and NF serial standards as well as the IEC 60502 , IEC60332-3,IEC60754,IEEE383 and lEC 61034standards of the International Electric Engineering Committee lt mainly applies to nuclear power station and also the situations requiring high-degree safety. such as underground transforming plants, high-rise buildings, subways, ships docks and chemical factories.
使用特性
APPLICATION PROPERTIES
1.额定电压为:0.6/1kv
2.工作温度:导体长期允许最高工作温度为90℃ ;
3.导体短路温度∶最高温度不得超过250℃,最长时间不超过4s;
4.电缆弯曲半径:电缆弯曲半径不得小于电缆外径的15倍;
5.电缆敷设温度不低于0℃.
1.Rated voltage:0.6/1kV
2.Operating temp: the permitted long-time operating temp ofconductor is 90℃
3.Temp at a short circuit: the temp max should not exceed 250℃,and the longest lasting time should not exceed 4s
4.Bend radius:the bend radius of cable should not be shorter thanfifteen times of outer diam of cable.
5.The laying temp should not be lower than 0℃
欢迎您的留言咨询