聚氯乙烯电力电缆

型号:

该产品适用于额定电压0.6/1kV的线路中,供输配电能之用(阻燃电缆适用于高层建筑、地铁、发电站、大型工矿企业等电缆敷设密度大,防火要求严格的地方)。

关键词:

聚氯乙烯电力电缆

所属分类:

产品描述

  额定电压0.6/1kV铜芯、铝芯聚氯乙烯绝缘护套(阻燃)电力电缆

  Cu-core/Al core PVC insulated and sheathed,flame-retarding power cable at a rated voltage of 0.6/1kv

  执行标准

  STANDARD IMPLEMENTED

  额定电压0.6/1kV聚氯乙烯绝缘和护套(阻燃)电力电缆GB/T12706.1-2002等效采用IEC60502.2-1997,阻燃型电缆燃烧特性符合GB/T18380.3-2001

  The above cable conforms to the GB/T12706.1-2002, which isequal to IEC60502.2-1997, Flame retarding property confor-ms to GB/T18380.3-2001.

  使用特性

  SERVICE CHARACTERISTICS

  电缆导体长期允许工作温度应不超过70℃,短路时(最长持续时间不超过5S),电缆导体的最高温度不超过160℃ 。

  敷设电缆时的环境温度应不低于0℃,敷设时,不受落差限制,维修简便。

  敷设电缆时其最小弯曲半径应不小于电缆外径的10倍,铠装电缆最小弯曲半径应不小于电缆的12倍,五芯电缆最小弯曲半径不小于电缆外径15倍。

  The permitted temperature for long-time operating should notexceed 70℃, and should not exceed 160℃ at a short circuit.(lasting no longer than 5s)

  The ambient temp should not be lower than o℃while layingcables.The laying is not limited by the drop height and easy tobe fixed.

  The shortest bend radius should not be shorter than ten timesof outer diam of cables for laying; For armored cable , it shouldnotbe shorter than twelve times of outer diam; and for 5-corecable ,it should not be shorter than fifteen times of outer diam.

  产品用途

  APPLICATION

  该产品适用于额定电压0.6/1kV的线路中,供输配电能之用(阻燃电缆适用于高层建筑、地铁、发电站、大型工矿企业等电缆敷设密度大,防火要求严格的地方)。

  The product applies to the lines of a 0.6/1kv rated voltage.Theproducts is mainly used for electric transmission and transpor-tation in highrise buildings,subways , power stations, entert-ainment places,industrial enterprises and sea pertrol platfor-m etc,where a high intensity of cable laying and a strongability are required.

111111111111111

欢迎您的留言咨询

我们的工作人员将会在24小时之内(工作日)联系您,如果需要其他服务,欢迎拨打服务热线:0514-84239996